Fisher-Price BARBIE 74518 User Manual

Owner’s Manual with Assembly InstructionsPlease read this manual and save it with your original sales receipt.For Model 74518Product features may vary

107• Position the vehicle body upright.• Fit the dashboard onto the top of the swivel bracket.• Align the screw holes in the dashboard andswivel brack

11Assembly• Fit the fender onto the ends of the handlebars. (Makesure the end of the fender marked FRONT is facingtoward the front of the vehicle.)• S

12• Position the front wheel between the handlebars.• Slide the front axle through the front wheel.17Assembly• Fit and hold an inner shock half to the

13Assembly• Position the vehicle upright.• Apply headlight labels to the fairing as shown.• Make sure the areas where the labels will be applied arecl

#12 x 11/4" ScrewShown Actual SizeAssembly• Position the handle so that it arcs away from thehandlebar. (The screw holes in the back side of theh

BARBIE is a trademark owned and used under license from Mattel, Inc. © 1997 Mattel, Inc. All Rights Reserved.Label DecorationProper label application

• Lift the seat to access the battery compartment.1• Place the battery upright in the battery compartment.Make sure the battery connector extends towa

17Battery Installation• Rotate the lock fastener 1/4turn using a slotted screw-driver to lock the battery compartment.• To make sure the lock fastener

10˚Incline should never be more than 10°5. Do not operate this vehicle with more than one rider,seated on the seating area. A child who is not sitting

How to Operate Your Vehicle19KCaring For Your VehicleL• Check all screws, retainers and protective coveringsregularly and tighten as required. Check p

CAUTIONUse the charger indoors only.2Important InformationA Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Problem Possible Cause SolutionVehicle does not run Undercharged battery Charge the battery. A new battery should have been charged for at least 18 ho

Vehicle was running but Loose wire or loose connectors Check all wires and connectors. Make sure the batterysuddenly stopped connector is tightly plug

Problem Possible Cause SolutionVehicle runs sluggishly Undercharged battery Charge the battery. A new battery should have beencharged for at least 18

Problem Possible Cause SolutionVehicle constantly blows fuses Wrong type of fuse used Your vehicle requires a Power Wheels®25 amp fuse in the battery.

We are continually expanding our Authorized Service Center Network. Please check this listing forthe Authorized Service Center nearest you. If there i

25ALABAMABIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831BIRMINGHAM - Frigid Service & Sales, 1861 Centerpo

26ALABAMABIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831BIRMINGHAM - Frigid Service & Sales, 1861 Centerpo

27ALABAMABIRMINGHAM - Frigid Service & Sales, 701 Graymont Ave. North, 35203, (205) 323-5831BIRMINGHAM - Frigid Service & Sales, 1861 Centerpo

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 ©1998 Mattel, Inc. - All Rights Reserved.Do Not Return Your Vehicle to t

WARNING• Children can be harmed by small parts, sharp edges and sharp points in the vehicle’sunassembled state, or by electrical items. Care should be

4• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather thanreturn this product to the store

5PartsFairingNot Shown: Label Sheets6 Volt Battery LLeft HandlebarVehicle BodySeatFront AxleRight HandlebarFront WheelHandleWheel Bushing – 2#8 x7/8&q

61. Vehicle Body2. Fender3. Inner Shock Half - 24. Outer Shock Half - 25. Cap Nut - 26. Front Axle7. Hubcap - 28. Wheel Bushing - 29. Front Wheel10. H

Important Notes:• Your new battery must be charged for at least18 hours before you use it in your vehicle for thefirst time.• We recommend that you st

®• Plug the charger into a standard wall outlet.Note: If power flow to the wall outlet is controlled by aswitch, make sure the switch is “ON”.• Before

Swivel BracketLeft Handlebar• Stand the vehicle body on its rear wheels.• Slide the left handlebar through the holes in the left sideof the swivel bra