Fisher-Price 79638 Instruction Sheet

Model Number: 79638, 79639, 79640, 79641, B2875Please keep this instruction sheet for future reference, as it contains important information.Adult ass

10•At an angle, fit the storage caddy onto the tab on either frame.Assembly is now complete.FrameTabStorageCaddy20Assembly•From behind the seat, be su

11BABATo tighten the waist belts:•Feed the anchored end of the waist belt up through thebuckle to form a loop .•Pull the free end of the waist belt .

12•Fit the base tray onto the seat armrests. Push down until the base tray "snaps" into place.Base TrayArmrestArmrest6Prevent serious injury

13Using the TraysHint: The base tray can be removed two ways (see steps 9 and 10)!• Squeeze one or both of the latches underneath the basetray and li

14Adjusting the SeatTo adjust the seat height:•Press the levers on both seatheight adjusters and lift or lowerthe seat to the desired height.•Make su

•Fit the holes on the base tray latches onto the pegs on theback of the high chair frame.•With the legs all the way open, lower the seat to position 1

Care•The pad and headrest are machine washable. Wash the padand headrest separately in cold water on the gentle cycle.Do not use bleach. Tumble dry se

2Occasionally a consumer may experience a problem with one of our products. If this should happen, please call us toll-free, rather than return this p

Parts3SeatBottom2 Seat Bottom TubesSeat BackFrameFrameFootrestBack Base4 Screw RetainersFront BaseHingeRodStorageCaddyBase TrayFood TrayPad#8 x 3/4&qu

•Place the seat bottom face down on a flat surface.•At an angle, fit the footrest on the seat bottom, as shown.Seat BottomFootrestIMPORTANT! Before as

•Turn the seat bottom assembly upright.•Fit the seat back pins into the openings in the top side ofthe seat bottom assembly.SeatBottomAssemblySeat Bac

Assembly•While pressing the levers on the seat height adjusters, liftthem to position 4 on the frame front legs, as shown.6Seat HeightAdjustersPositio

SeatHeightAdjusterSeatHeightAdjusterSeatBottomTube EndsBack andBottom View7Assembly•Push each seat height adjuster to be sure they are completely on t

Assembly8• Lift the assembly upright.•From the front of the assembly, place the pad onto the seat.• Lift the bottom of the pad. Insert the two elastic

Assembly9• Lift the top of the pad.•Thread the waist/shoulder belts through the bottom slots inthe back of the seat pad.18Lower ShoulderBelt SlotsUppe