Please read this manual and save it with your original sales receipt.Tools needed for assembly: Phillips Screwdriver, Adjustable Wrench (or Pliers),
H7332pr-0920• Face the front end of the vehicle. • Slide a 7/16" washer onto one of the front axles.• Slide a round bushing, ring end first,
H7332pr-0920• Press firmly on the front of the cowling to snap the four, front tabs into the slots in the vehicle. Make sure the side and rear tabs s
H7332pr-092010Hint: You may want the help of another adult to support the steering column near the steering linkage while assembling the handlebar to
H7332pr-0920• Fit the handlebar assembly onto the end of the steering column. Make sure the handlebar grip area points towards the rear of the vehic
14ASSEMBLYFH7332pr-0920 • Insert six #6 x 1" screws through the back handlebar assembly, as shown. Tighten the screws.18R• Apply labels as sho
H7332pr-0920TMProper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines in mind:•
H7332pr-0920IMPORTANT! Use only a Power Wheels® 12 volt lead-acid rechargeable battery. Use of any other battery will damage your vehicle. Make sure t
H7332pr-0920• Your Power Wheels® battery is a non-spillable sealed lead-acid battery. It must be recycled or disposed of in an environmentally sound
H7332pr-0920Teach Safety Rules to ChildrenWhile children can quickly develop the skill necessary to drive this vehicle, it is important to remember th
H7332pr-0920REMOVE LOCK-OUTSCREW ON SIDEOF SHIFTER FORHIGH SPEEDOPERATIONLock-Out ScrewShifterIMPORTANT! Use this vehicle ONLY outdoors. Most interior
2TABLE OF CONTENTSAH7332pr-0920• Your new vehicle requires adult assembly. Please set aside at least 45 minutes for assembly.• You must charge your
H7332pr-092020Bumper-to-Bumper* Limited WarrantyOne year limited warranty from the date of purchase on the Power Wheels® vehicle.Six month limited war
H7332pr-0920 PROBLEM POSSIBLE CAUSE SOLUTIONVehicle does not run Undercharged battery Charge the battery. A new battery should have been char
H7332pr-0920Short run time (Less than Undercharged battery Charge the battery. A new battery should have been 1 - 3 hours per charge) charged fo
H7332pr-0920Vehicle runs in low speed, but High Speed lock-out not disconnected The vehicle was pre-set to run only in low speed. To allow does not
PRINTED IN CHINA 73610a-0920 Or contact your local independently owned and operated Power Wheels® Authorized Service Center.For the location neare
H7332pr-0920• In the unassembled state, this package contains small parts. Adult assembly is required.• Use the charger in dry locations only.• Preven
H7332pr-09204PARTSC• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this
5TABLE OF CONTENTSAH7332pr-0920 Fasteners Shown Actual SizeFor your convenience, we included extra fasteners!Note: Tighten and loosen all screws with
6TABLE OF CONTENTSAH7332pr-0920TM6PARTS PICTURED2486915 1 Vehicle 2 Cowling 3 Seat 4 Wheel - 4 5 Hubcap - 4 6 Cap Nut - 5 7 Steering Column 8 H
H7332pr-0920Important Notes• Your new battery must be charged for at least 18 hours before you use it in your vehicle for the first time.• We recomm
8TABLE OF CONTENTSAH7332pr-0920Battery Charger Connector8BATTERY CHARGINGEH7332pr-09201212• Plug the charger connector into the battery .• Plu
H7332pr-09203• Slide a hubcap, indented side down, onto the rear axle.• Slide a wheel onto the rear axle. Make sure the ribs on the wheel face up.•
Comments to this Manuals